The last thing homeowners need is another costly headache. However, roofs take on a lot of damage after a hailstorm or strong rain has passed the previous day. Some will get in touch with their roofing contractor right away and for a good reason, many of them provide roofing inspections.
These provide homeowners the right roof repair estimates. Nevertheless, if you want to have that peace of mind, you can perform the roof inspection on your own. By looking at the following areas, you can make a correct description and conduct short term repairs before getting in touch with a professional roofing contractor.
What To Do Before Calling A Roofing Contractor
The sturdy material that binds the shingle rows to the roof’s flashing can handle rainshowers. But, hailstorms and windy rainstorms can severely damage the caulks. Caulk that may have weakened can cause the shingles to be dislodge in case it needs to endure another rainstorm without redress.
Check the caulked areas on the roof’s flashing. In case you notice some small cracks, you can fix this by recaulking. In case there are several cracks, take some pictures of these problem spots and show it to your roofer.
Rusted Spots on Flashing
As time goes by, the flashing will eventually suffer because of micro ponding after a rainstorm. Flashing can endure moisture for a very long time. Rusted spots are quite common in case your roof is more than 10 years old. These spots will require redress to prevent damaging the shingles as well as the membrane below the roof’s flashing during the next rainstorm.
Peeling Paint on Metal Roofs
Metal roofs could last as long as seventy years with the right maintenance. A part of their long lifespan is because of their protective coating that aids them in reflecting UV rays to assist in the insulation of properties and lower the moisture that is permeating the surface. Hailstones especially the ones with sharp edges usually peel this protective layer above the metal roofs. Old metal roofs that have been subjected to varying temperatures tend to show the same symptom as well.
Worn Out or Damaged Pipe Collars
Pipe collars contains durable EPDM rubber, which is a material used to make roofing membrane. Roofing contractors in Myrtle Beach commonly use the exact same material to create a strong airtight seal surrounding the opening of your vent. In certain instances, strong storms would lead to damages in the rubber material. You could redress tiny leaks through caulking. However, a pipe collar that has worn out will need professional attention right away. So, call NMB Roofing Pros.
Mold, Algie, Fungi On Roofing Membrane
The roofing membrane below your shingles show indications of any lifeform like fungi, mold, and algae, then there is a big possibility that the roofing membrane is ponding. Sunken or uneven roofing membrane areas could cause it to trap water. This will allow lifeforms like those mentioned earlier to make a habitat. They can eat away wooden shingles as well as lead to long term problems to other single materials when they are not correctly redressed.